KB9022 Not programming in ZIF

Ответить
Jesus N. Gomez
Сообщения: 29
Зарегистрирован: 23 май 2020 01:14

KB9022 Not programming in ZIF

Сообщение Jesus N. Gomez » 02 июн 2022 20:58

Hello:

To my surprise, I am not able to program an ITE KB9022Q with SVOD3 and ZIF kit (latest FW and SW). Its telling me all time, and in different, previously tested computers, "Connecting to KBC status false".

As a board, I use of course ZIF-ENE. And it tells me all the pins are OK. But when I try to read from the EC, it tells me the above mentioned message.

Any ideas???. I am in a hurry, BTW (...as ever).
SVOD3 KB9022 failure.JPG
SVOD3 KB9022 failure.JPG (112.47 КБ) 667 просмотров

Jesus N. Gomez
Сообщения: 29
Зарегистрирован: 23 май 2020 01:14

Re: KB9022 Not programming in ZIF

Сообщение Jesus N. Gomez » 03 июн 2022 20:52

Anybody out there???

Jesus N. Gomez
Сообщения: 29
Зарегистрирован: 23 май 2020 01:14

Re: KB9022 Not programming in ZIF

Сообщение Jesus N. Gomez » 08 июн 2022 17:14

Hello:

After a conversation with SVOD support, and without any technical explanation, the SVO3 and the ZIF began to recognize the EC. So I am wrinting this to express my gratitude to all the SVOD staff. And, of course, to all of you, members like me. "Problem" solved.

Ответить