SVOD-Project

Hi there,

I'm pretty new to all this stuff, so please forgive me, if I'm asking stupied questions.

My first "project" is to read out an MEC1633 on a Thinkpad T450s.

Here is the logfile:

Firmware version 1.0.5.8 date 14.8.2019
MEC mode selected
MEC IDCODE: B1240020
Device ID: 19
Device Revision: 1
Device Status: C
Flash Status: 000000000C
Flash Configuration: 010000000C
Boot Block in not protected mode
Start reading: 04.09.2019 21:04:01
End reading: 04.09.2019 21:04:03
The arithmetic operation has caused an overflow.
Read false


any idea, what could have caused this error?

Hello
Fix, try new update

Software version 1.0.8.6 date 06.09.2019
Running Microsoft Windows 7 Профессиональная 64 bit
Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
Device connected in work mode
Firmware version 1.0.5.8 date 14.8.2019
MEC mode selected
MEC IDCODE: B1240020
Device ID: 19
Device Revision: 1
Device Status: C
Flash Status: 000000000C
Flash Configuration: 010000000C
Boot Block in not protected mode
Start reading: 06.09.2019 12:31:57
End reading: 06.09.2019 12:32:00
CRC calculated 3B04
CRC stored 3B04
Read OK

Thank you for the fix, now it worked.